Mold Release Agent - List of Manufacturers, Suppliers, Companies and Products

Mold Release Agent Product List

1～6 item / All 6 items

Displayed results
High-performance continuous release agent Fluorosurf CFRP molding case study

High-performance continuous release agent Fluorosurf CFRP molding case study

Even difficult moldings that cannot be released with regular release agents can be continuously released. Plus, there's no need for cleaning as there is no transfer to the molded product!

"FloroSurf FG-5093" is a mold release agent that dissolves a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in cases where conventional release agents fail to provide satisfactory results. It boasts exceptional durability, with a proven track record of continuous release over thousands of shots, and its performance can be restored by reapplying with a brush or spray. 【 Case Study in Thin CFRP Molding 】 1. Background Introduction In the thin molding of carbon fiber, such as separators for fuel cells, conventional release agents would cause cracking during demolding, resulting in only about one good product out of ten sheets, leading to the abandonment of mass production. 2. Implementation Results By using FloroSurf FG-5093, continuous molding of 1000 shots became possible, and mass production was confirmed. Additionally, there is no transfer to the molded product, eliminating the need for cleaning and significantly shortening the process. *If you would like a free sample, please include "Sample Request" in your inquiry.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Rubber Molding Case] Successfully achieved continuous molding for shapes that are difficult with conventional release agents.

[Rubber Molding Case] Successfully achieved continuous molding for shapes that are difficult with conventional release agents.

In cases where conventional release agents do not work well for molding elastomers, please try Fluorosurf. There are many successful examples of continuous molding.

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. Additionally, since the release agent does not adhere to the workpiece, cleaning after molding is unnecessary. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Improvement of productivity in nanoimprint molding of 30-100nm.

[Case Study] Improvement of productivity in nanoimprint molding of 30-100nm.

【Release Agent Case Study】We will introduce the background, challenges, proposed solutions, and results of implementation for a nanoimprint manufacturer. *Samples available for distribution.

The "Fluoro Surf NL Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and its performance can be restored by reapplying with a brush or spray. [Challenge] - We want to increase throughput. *If you would like a free sample, please include "Sample Request" in your inquiry.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
New generation mold release agent "Fluorosurf FG-5093 Series"

New generation mold release agent "Fluorosurf FG-5093 Series"

A new generation of fluorine release agents that can be applied in-house! Reducing defects from large plastic molding to precision molding!

The "FloroSurf FG-5093 Series" is a reactive mold release agent from Fluoro Technology that can accommodate nano and submicron level molds. It can be used for molded products where silicone cannot be used, as well as for molded products that undergo secondary processing. It is not only applicable for mold release of complex designs in plastic molded products and reducing defects caused by weld lines, but it can also be used in various areas, which is expected to improve production efficiency. It can be easily applied by brush or spray, and because it forms a film at room temperature, external contracting like Teflon processing is unnecessary. Additionally, if performance declines, it can be revived simply by reapplying it. 【Features】 ■ Many cases that could not be released with Teflon processing have been resolved ■ Film thickness of only a few nanometers with proven mold release in nanoimprinting ■ No impact on secondary processing ■ Numerous reports of continuous release for thousands of shots ■ Can be revived with just reapplication if performance declines ■ No need to remove the film during mold reworking ■ Suppresses gas soot adhesion and simplifies cleaning *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Would you like to eliminate the hassle of mold cleaning and post-molding? 【*Sample available】

Would you like to eliminate the hassle of mold cleaning and post-molding? 【*Sample available】

No transfer to molded products! Prevention of deposits! What is the new generation coating release agent 'FloroSurf' that anyone can apply on-site, which seems like it should exist but doesn't?

The "FloroSurf" handled by Chubu is a nano-level fluorine-based mold release agent that surpasses baked-type fluororesin processing and silicone release agents. The application method is very simple, allowing anyone without specialized knowledge of coatings to easily create functional coatings using a brush, dip, or spray. With conventional products, there is a necessity for secondary processing after washing because release agents cannot be used for products made by injection molding, and they tend to transfer and remain on molded products. However, our "FloroSurf" does not transfer fluorine components, eliminating the need for cleaning molded products. Additionally, there is no need to remove the coating during mold reworking. (This is a true story that sounds unbelievable!) 【Reasons to Choose Us!】 ■ 96% success rate in solving release issues! ■ Suitable for nano and micron-level molds ■ Reduction in defect rates for plastic molding! ■ Reapplication when release performance degrades is as simple as applying another coat! We can propose "fluorine coatings" that fit your processing environment. Please consult with Chubu, which offers a wide range of highly rated products! *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Release agent example: No transfer to the workpiece in dry conditions! Continuous release is possible!

Release agent example: No transfer to the workpiece in dry conditions! Continuous release is possible!

It is easy to perform release agent treatment that surpasses in-house baked fluororesin processing. Significant reduction in processing costs and delivery times!

The "Fluoro Surf FG-509X Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. When applied to the mold with a brush or spray and allowed to dry at room temperature for about 10 minutes, it reduces the adhesion of the surface molding resin, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents do not work well. The film is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. Additionally, regulated substances such as PFOS, PFOA, and PFHxS are not used. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing. ■ No need to remove the film during mold reworking. ■ No transfer of release agent components, making cleaning of molded products unnecessary. ■ Low odor and non-flammable, maintaining a good working environment and easy management.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.